Duet Ring

Duet Ring

Level: Intermediate
Sessions: 6 hours, 2 days
Descrption: In this technique-packed class stretching over two days, students will make a beautiful statement ring out of fine silver metal clay. The ring features a beautiful stone in an ornate setting, as well as optional ornaments above and below the stone. First, Sulie will guide you as you make the ring itself. In the second half, we will add a complimentary setting to your base ring by shaping, forming and setting. Students will have some opportunity to do some custom embellishing to the setting.

Tools

Some tools will be provided by the instructor. Please refer to your registration. This tools list only reflect the fabrication part of the project.

Bench Block
Steel or Anodized aluminum - Used as a hammering surface for metal stamping or working with metal.
Curved Burnisher

Used to burnish or smooth the surface of metal. For most projects using this tool you will want at least a 3mm ball. This tool may also be found at your local craft store for use with clay or nail art.
Flex shaft
Rotary tool used for polishing, drilling, finishing, etc. Flex shafts are available for purchase new and gently used at the class. Pleased contact the instructor if are interested in purchasing one at the class as quantities are limited.
Hand Tools

Basic hand tools – Any quality is appropriate for my classes. These do not need to be high end or expense.
- Round nose - Typically it is preferred that the round nose be a fine tip. Especially for classes with detailed wire work.
- Chain/needle nose – Tapered jaws for general metal and wire work. Non-serrated are requested for all of my classes. Typically requested for classes to be used for opening and closing jump rings; in which case, 2 pairs are requested or a combination of chain nose and flat nose is suitable.
- Flat nose – Similar to chain nose but the jaws are not tapered. Non-serrated are requested for all of my classes.
Helping Hand/Third Hand
Used to hold small parts in place while soldering. Instructor will provide to share for every class needed.
Magnifier or Optivisor
– For almost all classes this is listed as an “As Needed” tool. If you have sight challenges it is recommended that you are properly prepared. For advance stone setting classes this is required! If you decide to use reading glasses consider better than 2.5x.
Muslin buffing wheels
Used with a flex shaft or Dremel to polish metal.
Needle File Set
Used for filing smaller pieces of metal and tight places. When required, either diamond coated or fine tooth is preferred. Some students may prefer to use smaller files as opposed to the student files for their projects.
Ott Light or Task Lamp
This is optional item that is listed for every class. It is up to you to determine whether or not you will need to have one depending on your vision.
Ring Clamp
Used to hold rings, but some like to use a ring clamp for holding metal when filing to save their hands. Required mostly for stone setting classes to hold the ring shank.
Soldering Kit

(Optional)
Items in this Soldering Kit will be provided for use during the class. If you are interested in ordering a kit please click on the image. Kit includes: Butane torch, butane, 1 tube solder paste, fire tweezers, copper tweezers, Sparex, tripod with mesh, flux, soldering board. (Note: kit will be delivered at class. If you require the kit prior to class please contact us to make arrangements.
Student Files
Standard size is 2/o. For filing metal. . Instructor will provide to share for every class needed.
Wood Ring Mandrel
Used to brace rings for polishing; this will save your hands. However, I also use a wood ring mandrel for project where I have to drill into the ring, this way you do not ruin your steel ring mandrel. Wood ring mandrels will be provided to share in classes.